Конструктор GUSar M(черная маска, ENIG)

8,448.00

Напишу ещё раз русским языком, этого конструктора некогда не будет, есть его аналог https://chipkin.ru/product/gusarkit/

Нет в наличии

Описание

В конструктор входит, все микросхемы, резисторы, конденсаторы, внешние разъёмы.

Работает только с 16мб и выше, иначе могут быть глюки.

Плата сделана по подобию https://www.vogons.org/viewtopic.php?f=62&t=42431 

Если кто не знает что это такое https://ru.wikipedia.org/wiki/Gravis_Ultrasound

Внимание, плата не распаяна, так что запаситесь припоем, канифолью и валерьянкой!!

По поводу задней планки, подходит от Cristal.

Спасибо за сборку прототипа Александру Севрюгину

На фото представлена распаяная плата, для образца.

 

 

2 отзыва на Конструктор GUSar M(черная маска, ENIG)

  1. Gaertner Andreas

    Finished the build: it works nicely (as mentioned above, it needs some guestimation due to the blurry silkscreen and four missing plus one wrong R position).

    For the bracket, the plugs sold by pavel on here are best suited for the ALS100 bracket, if the bracket from the argus is used, Digikey has connectors that are standing higher and do fit that version better. Cheers!

  2. Gaertner Andreas

    Hi Pavel,
    the black PCB had the following issues on my build:
    Most of the silkscreen, especially on the right side is extremely blurry and not readable (was only able to identify many spots by another build and the schematics. Also, on the left side, R1 to R4 are not all marked and R21 should probably be R12.

    Also, all the SIMM sockets I got have a support pin in the middle, which isn’t available on the PCB (so it needs to be cut away). I’m still waiting for a few remaining parts to test if it’s working. Cheers!

Добавить отзыв